Page not displaying
Mood:  sad
Topic: HTML Questions

Several weeks ago my page stopped displaying (except for the ads at the top) at https://www.angelfire.com/az/Taylorology . When I go to the webshell editor, the page will view just fine from within the editor (but of course no ads are there when viewing from within the editor).  Is there some sort of html code I need to add to (or delete from) the page so that it can be viewed normally again?  

Is something in the html ad code at the top conflicting with something in my html code (my code is all very simple)?  If so, what is it?

 

Domain not showing up in account.
Mood:  down
Now Playing: news
Topic: HTML Questions
I haven't updated my website/domain in 2-3 months b/c I've been gone. I went into my account today to check on the domain and it was no longer listed. I checked the URL but it's still there but I can't update it. It keeps going to free web page that I want nothing to do with. I checked last months bank statement and we were billed for the domain. My blog and photoblog are also gone. I didn't cancel or delete anything and not sure why everything is all of a sudden gone. I don't share any of my information with anyone (I'm a solitude type of person). I don't get how it is showing up but not in my account. I sent out a ticket but not sure the hours for help. I also noticed that domain help wasn't available. I don't understand what's going on?

How to add RSS feed to Angelfire website
Topic: HTML Questions

Please could someone help me with info how I can add an RSS feeder to my website (not blog) which is on Angelfire.

I am quite fit with HTML coding but have no clue about XML or PHP - whereas the second may not be accepted by Angelfire anyway.

 Everything I have read so far on the internet is quite confusing for me so please could anyone direct me to a simple tutorial how I can add an RSS feed to my website.

This would be very much appreciated!  Thanks you in advance,

Pe 

Please Help!!!
Mood:  quizzical
Topic: HTML Questions
hi. someone PLEASE help. i feel like a real dummy asking this, but i am frustrated here. HOW on EARTH do i place meta tags in Angefire??? do i go through the webshell & create a new file & name it advanced editor. html???

Form is not following function
Mood:  irritated
Topic: HTML Questions

I have a form loaded on my webshell that is supposed to email me the results that the visitor selects but all I get is the email address and name of the visitor emailed to me.  How can I see what they are selecting or typing in the forms blocks?  Any help is greatly appreciated.

 

Ksatreya

Adding "Hit Counter Script" troubles
Mood:  irritated
Topic: HTML Questions

I've been trying to add a hit counter to my page https://www.angelfire.com/eventsglba/eventsglba2008.htm but receive an error evey time. My eventsglba2008.htm is 919K. The hit counter script I've been trying to add is from https://www.angelfire.lycos.com/build/scriptlib/counter.tmpl

Here is the steps I follow

1. Go to Web Shell

2. Open eventsglba2008.htm with Webshell > Advanced Editor

3. Add to the top of the eventsglba2008.htm text "<img src="/cgi-bin/Count.cgi">"

4. Press save

5. Receive error "Page cannot be displayed"

Please let me know how I can add a hit counter to my page https://www.angelfire.com/eventsglba/eventsglba2008.htm

Thanks.

Automatic pinging??
Topic: HTML Questions

I was wondering if we can use this code from Technorati in our blogs to do automatic pinging?

Thanks,

Sallie

https://www.angelfire.com/sc/anderklan/seasidetales

 

<?xml version="1.0"?>
<methodCall>
  <methodName>weblogUpdates.ping</methodName>
  <params>
    <param>
      <value>YOUR WEBLOG NAME HERE</value>
    </param>
    <param>
      <value>http://www.YOURWEBLOGURL.com/</value>
    </param>
  </params>
</methodCall>

Links Not Working
Topic: HTML Questions

I just moved my blog over to Angelfire so I can have everything together with my web page in one spot.  I've gone live with my blog and will be using more frequently I hope. 

The problem I have is that it shows a link for Newer | Latest | Older on the page and it comes with the editor it's not something I put in there.  It isn't live, it doesn't work.  Do you have to have more than six entries on the page for it to begin to work?

Our blog is at https://www.angelfire.com/wa/ANGELHEARTESKIES/blog/

If anyone can help I'd be very appreciative!

Regards,

Lynn

Where Did it Go?
Now Playing: Where Did it Go?
Topic: HTML Questions

Similar to the question asked by "I'm confused,"  I have had my Angelfire account and website for a number of years, but have not updated it in some time.  As of this moment the pages cannot be accessed. I would really like to retrieve this data.  Is there any way to retrieve archived data?

https://www.angelfire.com/ma/mamia

Adding A "Member's Only" Page To Website
Topic: HTML Questions
I create a club page on angelfire and I want to have a private member's page for only our members to access.  What do I have to do to be able to do that? 

Xhtml and favicons
Mood:  not sure
Topic: HTML Questions
I'd like to know if Angelfire supports Xhtml and whether or not they support the use of a favicon.  I asked them once, but they didn't answer.  And I'm trying to decide if I should stay with Angelfire if not.

Sending a website to sleep
Topic: HTML Questions

Hi,

I want to close my website for a while but not for good. How can I send it to sleep without destroying its content or losing my homepage name? I just would like it to be not active at the moment.

Can anyone tell me how to do it?

Thanks a lot, Sabine 

Confused
Mood:  quizzical
Topic: HTML Questions

I'm confused.  I have had my Angelfire account and website for a number of years, but have not updated it in some time.  The pages can still be accessed and still get a few hits, but some of the information is out of date.  So today, I thought that I would update some of the information and bring them up to date.  However, I cannot locate them in the webshell.  What happened?  How can I get to them so that I can update them or even remove them.

 

Thanks,

Joe

joes1650@hotmail.com 

Jules
Topic: HTML Questions

Forgive me if this seems a very simple problem to solve. I am a complete novice to web building and have only managed very basic tasks on my website. I have uploaded j-pegs and gifs and am happy with the results now I have come to the bottom of my page in the webshell editor where there is a box that both text and html can be inserted. I want to put an image here using html but I would like to know how to code it because my image code refers to the file on my hard drive so only I can view it if you see what I mean? Anyone looking at my web page other than me cant see the image, I have uploaded it as a j-peg file but I cant seem to place it in this box PLEASE HELP!

julhgh@aol.com

 

Music Player
Mood:  a-ok
Topic: HTML Questions
I found a music player code on http://www.mysplayer.com/  and inserted the music file url from angel fire into the code.  I pasted everything on the text block section of basic editor. The music player shows up on my page, but the music does not play. What do I do?

Music Player
Mood:  a-ok
Topic: HTML Questions

*Where do you post music player code in the basic editor?

*What is the best music code player that works for angefire?

*Am I able to use a song that I've uploaded on angelfire on the music player?  If so, what is the procedure?

 

Thank you,

-Steph- 

My site won't display
Mood:  not sure
Topic: HTML Questions

I was trying to get my site on Google and it said I had to either add a meta tag or an html page. First I chose metatag which required me to add something in the html editor, which I did, that is when my page stopped displaying. I went back in to the html editor and deleted the tag I had added and resaved and still my site isn't displaying any more. Can anyone help me?

http://coozesoldeenglishbulldogges.tripod.com/

 I just tried to view my site again and this time got an error message:

! Problems with this Web page might prevent it from being displayed properly or functioning properly. etc. etc.

Then I click on the details tab and it says:

Line: 2

Char: 13

Error: Expected ';'

Code: 0

URL: http://www.lycos.ca/header-tripod-member/?Site=LycosTripod

 

But I don't know what it means.

 

Here's the text in my html editor:

<!-- \/ starthtml -->
<html>
 <head>
   <!-- The block of META tags is required by Homepage Studio  -->
   <!-- to identify this file as created by Freeform Editor.   -->
   <!-- Please do not remove them, but feel free to append     -->
   <!-- them with your personal data below. Meta tags help     -->
   <!-- search engines identify the content of your page.       -->
   <META HTTP-EQUIV="Content-Type" CONTENT="text/html; charset=iso-8859-1">
   <META NAME="keywords" CONTENT="enter keywords here">
   <META NAME="description" CONTENT="enter a description here">
   <META NAME="author" CONTENT="enter your name here">
   <META NAME="generator" CONTENT="FreeFormEditor 1.0">
   <TITLE></TITLE>
 </head>
<body bgcolor="#FFFFFF" text="#000000" link="#0000EE" vlink="#551A8B">

</body>
</html>
<!-- /\ end html  -->
  

Please tell me what is stopping my page from displaying.

 Thank you very much.

Custom HTML Boxes
Topic: HTML Questions

Creating a blog questions: 

1. Can you put a customized banner on your blog -- where would I find that feature to do that? 

2. Are there any HTML boxes to put blinkies, widgets, graphics or counters in on the sidebar?  I don't seem to see any so where should I look?  Or are all templates fixed and this is not available?

Suggestion:  A link on the blogs to this help blog or on the manage control page would be nice.

Thank you.

Why are my links no longer appearing
Mood:  irritated
Topic: HTML Questions

Looking for HTML code
Mood:  a-ok
Topic: HTML Questions
I'm looking for a HTML code for a mini calender for my website, can anyone help please?